Series Specification
| Item | Part Name | Model Name | Power (W) | Input Voltage (VAC) | Output Voltage (VDC) | Output Current (A) | Efficiency | Size (mm) | Cooling System | Weight (Kg) |
| 1 | 22KW OBC | ATC22K-380S380-W | 22000 | 3 phase 304-456 1 phrase 175-265 | 200~450 | 64 | ≥94% | 370x252x158 | Liquid | 20 |
| 2 | ATC22K-380S540-W | 400~650 | 46 | |||||||
| 3 | ATC22K-380S640-W | 450~750 | 40 |
Description | Technical specifications | Remark | ||
Environmental characteristics | Operating temperature | -40~65℃ | Long-time working | |
Vibration/noise | Meet the QC/T 895-2011 standard |
| ||
Salt spray experiment | Meet the QB/T 2423.17-2008 standard |
| ||
Output Power | 22KW |
| ||
Input voltage range | Three-phase 304~456VAC (line-to-line voltage, three-phase four-wire) |
| ||
Output voltage range | 200~450/400~650/450~750VDC |
| ||
Low voltage input auxiliary source | 13.8VDC（2Amax） |
| ||
Activation method | PP/CP/hard wire |
| ||
Voltage accuracy | ±1% |
| ||
Output maximum current | Three phase: 56±2A, single phase: 20±2A |
| ||
Voltage ripple factor | ≤±1% |
| ||
Current accuracy | ±3% | Half load or more | ||
Efficiency | ≥94% | Rated voltage Full load | ||
Parallel function | Networking is performed by internal CAN communication, and up to 8 modules can be connected in parallel. |
| ||
Output response time | The rise time of the output voltage of the car charger should be less than 300ms, and the overshoot should be less than 10%. After receiving the shutdown command, the current drops below 10% within 300ms and drops to 0A within 500ms. |
| ||
Other protection features | Input overvoltage, input undervoltage, output overvoltage, output undervoltage, short circuit, output overcurrent, overtemperature, reverse connection protection, potential equalization and ground protection, power failure protection. |
| ||
Over temperature protection | When the temperature reaches 85 °C, the output power is reduced by half. The temperature is <80 °C in 10 minutes, and the full load is automatically restored. After 10 minutes, the temperature is >80 °C, then it is turned off. When the temperature is >90 °C, it will be shut down directly. |
| ||
CAN byte speed | 250Kbps/500Kbps |
| ||
Dielectric strength | Output to the outer casing | 2000VDC /60S 10mA Max |
| |
Input to the outer casing | 1500VAC /60S 10mA Max |
| ||
Input to output | 3000VAC /60S 10mA Max |
| ||
Insulation resistance | Input to output | ≥20MΩ |
| |
Input to the outer casing | ≥20MΩ |
| ||
Electromagnetic compatibility | Radiation emission | GBT 18387：2008，EN 55022 CLassB |
| |
Conducted emission | GBT 18387：2008，EN 55022 CLassB |
| ||
Radiation immunity | GBT 18387：2008，EN 55022 CLassB |
| ||
| Position | Socket model | Function | Brand | Plug model |
| A | HVC4P36MV306 | AC input | Amphenol | HVC4P36FS306 |
| B | HVC2P60MV100 | DC output | Amphenol | HVC2P60FS3116 |
| C | RT001823PN03 | Control terminal | Amphenol | RT061823PNH0 |
| Socket definition | Pin number | Interface definition | Description | |||||||||||||||
| AC input HVC4P36MV306 | 1 | FireWire 1 | L1 (single fire line fixed input) | |||||||||||||||
| 2 | FireWire 2 | L2 | ||||||||||||||||
| 3 | FireWire 3 | L3 | ||||||||||||||||
| 4 | N | Neutral/midline | ||||||||||||||||
| A | Interlock 1 | Connection interlock 5 | ||||||||||||||||
| B | Interlock 2 | Connection interlock 3/micro switch | ||||||||||||||||
| N | Ground wire | Product enclosure | ||||||||||||||||
| DC output HVC2P60MV100 | 1 | positive electrode | Output positive | |||||||||||||||
| 2 | negative electrode | Output negative | ||||||||||||||||
| A | Interlock 3 | Connection interlock 2/micro switch | ||||||||||||||||
| B | Interlock 4 | Connection interlock 6 | ||||||||||||||||
| Control terminal RT001823PSN03 | A | CAN1-L | CAN low | |||||||||||||||
| B | VCC+ | Normal input | ||||||||||||||||
| C | VCU_EN | Hard-wire wake-up OBC, enable signal (active high) | ||||||||||||||||
| D | CP | CP | ||||||||||||||||
| E | PP | PP | ||||||||||||||||
| F | WAKE_UP | VCU/BMS wake-up signal (1A) Isolated from input constants | ||||||||||||||||
| G | NTC1- | Temperature sensor 1 negative | ||||||||||||||||
| H | NTC1+ | Temperature sensor 1 positive | ||||||||||||||||
| J | NTC2- | Temperature sensor 2 negative | ||||||||||||||||
| K | NTC2+ | Temperature sensor 2 is positive | ||||||||||||||||
| L | CAN1-H | CAN high | ||||||||||||||||
| M | LOCK+ | Electronic locks | ||||||||||||||||
| N | LOCK+ | Electronic locks | ||||||||||||||||
| P | LOCK feedback | Electronic locks | ||||||||||||||||
| R | CP_OUT | CP status output, low level enable | ||||||||||||||||
| S | Interlock 5 | Interlock signal detection 1 | ||||||||||||||||
| T | Interlock 6 | Interlock signal detection 4 | ||||||||||||||||
| U | NC | NC | ||||||||||||||||
| V | TB_R | Terminal resistance selection, short circuit to C pin, the resistance is effective | ||||||||||||||||
| W | NC | |||||||||||||||||
| X | CAN2-L | Internal parallel CAN2 low | ||||||||||||||||
| Y | CAN2-H | Internal parallel CAN2 high | ||||||||||||||||
| Z | EN2 | Internal parallel enable (reserved) | ||||||||||||||||
Taiwantrade.com and iDealEZ.com uses analytical cookies and other tracking technologies to offer you the best possible user experience. By using our website, you acknowledge and agree to our cookie policy.
For more information on cookies or changing your cookies settings, read Taiwantrade & iDealEZ’s Privacy Policy.
